- Pedal-operated hydroalcoholic gel dispenser – large capacity
- Reinforced structure for safe use and installation
- Dimensions: W350 x D393 x H1239 mm
- All stainless steel 304L design
- Weight : 12.5 Kg
Reference : LMDGP02
- Pedal-operated hydroalcoholic gel dispenser – large capacity
- Reinforced structure for safe use and installation
- safety
- Dimensions: W350 x D393 x H1239 mm
- All stainless steel 304L design
- Weight : 12.5 Kg
- Display for distributing instructions to users (A4)
- 100% mechanical action with foot
- No manual contact required
- Canister access secured by a cover, locked by a latch
- Equipped with 2 castors for easy movement
- Supplied with chrome-plated brass dispensing spout and
- suction hose
- Suitable for most hydro-alcoholic solution containers
- up to 5 litres (not supplied)
- Stores 2 x 5 litre containers (1 used and 1 in stock)
- Dispensing height: approx. 1,000 mm
Tips – Washing hands with a hydoralcoholic gel
For successful disinfection, washing should not leave any part of the hand out and should last at least 20 seconds (30 seconds is even better).
– Step 1: Rub one palm against the other, rotating.
– Step 2: Rub the back of your right hand with the palm of your left hand, and vice versa.
– Step 3: With the fingers of both hands interlaced, move back and forth to clean the interdigital spaces.
– Step 4: Put the knuckles of both hands together and rub them back and forth, not forgetting the fingernails.
– Step 5: Clean the thumb of the left hand with the right hand, then vice versa.
– Step 6: Clean the tops of the fingers using small circular movements in the palm of the hand.
At the end of this cleansing, the hands are perfectly disinfected. Rubbing with hydro-alcoholic gel is an excellent alternative for eliminating pathogens from the hands if it is done properly. It has the advantage of requiring no water or drying.
Catalogue :
-
HAND-WASHING STATION
Reference : LMAT AISI 304 L stainless steel Backsplash height 586 mm, inclined at 30°, siphon. Non-return valve. Deep-drawn bowl 400 x 250 mm, 140 mm deep. EC/EF premixer. Wall bracket integrated into splashback. Gasket between bowl and splashback. Towel… -
Hand-washing basin with female control – Rectangular basin
Reference : LMASW AISI 304L stainless steel With 240 mm high splashback, inclined at 30°, siphon, gooseneck spout, 1/2‘’ EC/EF connection Non-return valve Hot/cold water pre-mixer Push tap factory-set at : 6 l/min Low water consumption, make ecology rhyme with… -
COLLECTIVE WASH-HAND BASIN – ELECTRONIC CONTROL
Reference : LMARE AISI 304L stainless steel Without splashback, with drain and siphon Rectangular deep-drawn bowl measuring 1140 x 320 x 165 mm Fitted with 2 electronically controlled mixer taps - 6V lithium battery (CR-P2) Operating pressure: 1 to 5… -
VARIABLE HEIGHT WORKBENCH
Reference : THV AISI 304L stainless steel table Top thickness 15/10th, reinforced by gluing a 19 mm water-repellent melamine panel Radiused top: 20 mm radius front and back, 60 mm dropped edges Welded AISI 304L 40 x 40 stainless steel…